CoreWyre — Infrastructure Integrity
Book Free AuditCall
Critical Infrastructure Vulnerability

The $10 Threat Your
Wi-Fi Cameras Can't Stop

Wi-Fi jammers are readily available online for as little as $10, according to published reports. A single device, small enough to fit in a pocket, can disable every wireless camera on your property simultaneously. Ring, Nest, Arlo, Blink — all of them. Instantly. Silently. This is not theoretical. It is happening now.

How Wi-Fi Jamming Works

Wi-Fi cameras transmit video over radio frequencies — the same 2.4GHz and 5GHz bands used by your phone, laptop, and smart home devices. A Wi-Fi jammer floods those frequencies with noise, overwhelming the signal and severing the connection between your camera and your router.

The result: your cameras go offline. They stop recording. They stop sending alerts. Your security system becomes a collection of expensive paperweights — and the intruder knows it.

According to published reports, these devices are available on major online retailers for under $10. While their use is illegal under FCC regulations, enforcement is effectively nonexistent for individual criminal use. The law does not protect your cameras. Physics does — if you choose the right infrastructure.

Vulnerable Wireless Systems

✗
Ring (all models)
100% Wi-Fi dependent, no wired option for most models
✗
Google Nest Cam
Wi-Fi only, cloud-required recording
✗
Arlo Pro / Ultra
Wi-Fi or proprietary wireless, battery powered
✗
Blink (Amazon)
Wi-Fi only, battery powered, cloud dependent
✗
Wyze Cam
Wi-Fi only, cloud-first architecture
✗
SimpliSafe Cameras
Wi-Fi dependent, no PoE option

Hardwired PoE: Physically Impossible to Jam

Power-over-Ethernet delivers both power and data through a single physical ethernet cable. There is no wireless signal to intercept, no frequency to jam, and no battery to drain. The only way to disable a PoE camera is to physically cut the cable — which requires accessing your infrastructure and leaves evidence.

One Cable, Everything

A single Cat6 ethernet cable carries both power (up to 30W via 802.3at) and data (up to 1Gbps) to each camera. No separate power adapter, no electrical outlet needed at the camera location.

No Battery to Die

PoE cameras receive constant power from the network switch. There is no battery to drain overnight, no solar panel to shade, no charging cycle to manage. Power flows as long as the switch has power.

No Signal to Intercept

Data travels through a shielded copper cable, not through the air. There is no radio frequency to jam, no wireless protocol to exploit, and no signal leakage to detect from outside your building.

PoE vs. Wi-Fi: Side by Side

AttributeHardwired PoEWi-Fi Cameras
Jam ResistancePhysically impossibleDefeated by $10 device
Power SourceConstant via ethernet cableBattery or AC adapter
BandwidthUp to 1 Gbps dedicatedShared, variable, congested
LatencySub-millisecondVariable, 20-200ms typical
Reliability99.9%+ uptime (wired)Subject to interference, range, walls
SecurityPhysical access required to tamperWireless interception possible
Scalability48+ cameras per switchNetwork congestion at 8-10 devices
Recording During OutageContinuous with UPSStops when Wi-Fi drops
InstallationProfessional cable runDIY, no cabling needed
Long-Term ReliabilityDecades (copper doesn't degrade)Firmware updates break connectivity

Real-World Scenarios

These are not hypotheticals. These are patterns reported by law enforcement and property managers across the country.

The Residential Burglary

An intruder activates a pocket-sized jammer while approaching a home with Ring cameras. The cameras go offline within seconds. The homeowner receives no alerts, captures no footage, and has no evidence. The intruder enters, completes the theft, and leaves. The camera logs show only a gap — minutes of nothing.

With PoE: Cameras continue recording throughout. Footage is stored locally. Evidence is preserved.

The Business After-Hours Break-In

A retail store relies on Arlo cameras for after-hours security. An organized theft crew jams the Wi-Fi from the parking lot before entering. The cloud recording service receives no video because no video was transmitted. Insurance denies the claim due to lack of documentation.

With PoE: Cameras never lose connection. NVR records continuously. Insurance claim is supported with evidence-grade footage.

The HOA Package Theft Ring

An HOA installed wireless cameras at its mail center after a spike in package theft. Thieves discovered the cameras were Wi-Fi based and began using a jammer before each theft. The board spent $15,000 on cameras that captured nothing when it mattered most.

With PoE: The community's investment actually works. Every theft is recorded in 4K with AI-powered smart detections.

The Parking Garage Assault

A multifamily property's wireless cameras in the parking garage experience frequent dropouts due to concrete interference and neighboring Wi-Fi networks. During an assault, the camera nearest the incident was offline. The property faces liability for inadequate security infrastructure.

With PoE: Hardwired cameras in concrete structures maintain 100% uptime. No interference, no dropouts, no liability gap.

Your Data. Your Property. Period.

With CoreWyre, every frame of footage stays on hardware you own, inside your building. No cloud upload. No third-party access. No subpoenas served to Silicon Valley for your security footage. When you own the infrastructure, you own the evidence — and you decide who sees it.

Replace Your Vulnerable Cameras

Stop hoping your Wi-Fi cameras won't get jammed. Book a free Integrity Audit and we'll design a hardwired PoE system that is physically impossible to defeat wirelessly.

Or call us directly: (719) 301-3011